3-STRIP DESIGN
WHAT IS A 3-STRIP DESIGN?
A 3-strip design is made out of offcuts from the single plank productions. It is therefore a very cost effective solution. 3-strip design is also often referred to as 'Parquet'.
Karelia 3-Strip boards are 188mm wide and 2266mm long.
This design is very suitable for smaller areas like kitchens or entrances. It is lively and shows you all the variation of the chosen timber species. Many of our customers also use a 3-strip design for a rumpus or similar.
Please note: you do not compromise on the quality or warranty with a 3-strip design. It is purely a different look compared to a single plank design. If you like the look, go for it.
We currently stock 2 Karelia 3-Strip Design options in New Zealand (both prefinished with a water-based acrylic lacquer).
Please find installation images of these 2 options below.
If you have a little bit more time (4-6 months), we can offer you more than 35 further 3-strip (or 2-strip) products on an indent basis.
Please feel free to browse our Inspiration Gallery.
Karelia 3-Strip boards are 188mm wide and 2266mm long.
This design is very suitable for smaller areas like kitchens or entrances. It is lively and shows you all the variation of the chosen timber species. Many of our customers also use a 3-strip design for a rumpus or similar.
Please note: you do not compromise on the quality or warranty with a 3-strip design. It is purely a different look compared to a single plank design. If you like the look, go for it.
We currently stock 2 Karelia 3-Strip Design options in New Zealand (both prefinished with a water-based acrylic lacquer).
Please find installation images of these 2 options below.
If you have a little bit more time (4-6 months), we can offer you more than 35 further 3-strip (or 2-strip) products on an indent basis.
Please feel free to browse our Inspiration Gallery.
Karelia Oak Natural
Board: 188x2266 (3x63mm strips) European Oak, Clear Lacquer |
Karelia Merbau
Board: 188x2266 (3x63mm strips) Merbau/Kwila, Clear Lacquer |
